Show presented, Show snmp, Show presented show snmp – HP MPX200 Multifunction Router User Manual
Page 79: Example, Syntax, Keywords
The default value is 2 seconds.
Example
c:\> rcli show performance /ip=10.0.0.12
Port Bytes/s Bytes/s Bytes/s Bytes/s Bytes/s
Number (init_r) (init_w) (tgt_r) (tgt_w) (total)
------ -------- -------- -------- -------- --------
GE1 0 0 0 0 0
GE2 0 0 0 0 0
GE3 0 0 0 0 0
GE4 0 0 0 0 0
FC1 0 0 0 0 0
FC2 58MB 58MB 0 0 117.81MB
show presented
The show presented command displays detailed information about one or more presented
targets, or for all presented targets associated with a specified physical target.
If you specify a presented target, only one presented target is displayed. If the target is a physical
target, there can be multiple virtual targets that map to it.
Syntax
show presented
Keywords
Displays the next available WWNs (one per port) for use with the map target
command. See
-available_wwnames
Specifies the port number for the Fibre Channel target.
-fc_port=
1
Specifies the name of the presented Fibre Channel target for which you want to view
detailed information.
-fc_target=
2
Specifies the port number for the GbE target.
-ge_port=
1
Specifies the name of the presented iSCSI target for which you want to view detailed
information.
-is_target=
2
1
You can specify either -fc_port or -ge_port, but not both. If neither keyword is used, detailed information is displayed
for all Fibre Channel and GbE ports.
2
You can use specify either -fc_target or -is_target, but not both. If neither keyword is used, detailed information
is displayed for all presented targets.
Example
c:\> rcli show presented -fc_target=5000-1FE1-5007-0CE8 /ip=10.0.0.12
Presented Fibre Channel Target
WWNN: 2004-00C0-DD13-8FBE
WWPN: 2104-00C0-DD13-8FBE
Port ID = 01-0F-01-00
Portal = 0
Maps to physical target: 5000-1FE1-5007-0CE8, 1st VP Group
Presented iSCSI Target
iSCSI Name = iqn.2004-08.com.qlogic:isr6200.0851e00030.b1.01.50001fe150070ce8
iSCSI Alias =
CHAP is Disabled
Portal = 0
Maps to physical target: 5000-1FE1-5007-0CE8, 1st VP Group
show snmp
The show snmp command displays SNMP information.
show presented
79