HP MPX200 Multifunction Router - Manual (Page 70)

CHAP is Disabled
CHAP Secret =
Portal = 0
Operational State = Logged Out
Initiator Device Path = No port specified
Discovery Method = NAME_SERVER
Operating System Type = Microsoft Windows Server 2003
Initiator is NOT Mapped
show io_statistics
The show io_statistics command displays I/O statistics for a single LUN or for all LUNs,
starts the collection of statistics when initially enabled and displays the output in a comma-delimited
format suitable for import into a spreadsheet program such as Microsoft Excel, with the following
columns of information:
•
LUN#
•
VP Group
•
Target
•
Read Blocks
•
Read I/Os
•
Write Blocks
•
Write I/Os
If a LUN is not specified, this command displays information for all LUNs.
NOTE: This command is supported with router firmware Version 3.1.0.0 or later.
The -lun_serial, -lun_wwuln, -lun_eui, -lun_naa, and -lun_any_wwuln keywords are
supported with router firmware Version 3.2.3.0 or later.
Syntax
Keywords
Specifies the WWPN of the storage array for which you want to view statistics. -array_wwpn=
If this keyword is not used, the command displays information for all storage arrays.
Specifies the Fibre Channel target WWPN of the storage array for which you want
to view statistics. -array_with_fc_target=
Specifies the iSCSI target name of the storage array for which you want to view
statistics. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN for which you want to view statistics. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN for which you want to view statistics. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUNfor which you want to view statistics. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN for which you want
to view statistics. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN for which you want to view
statistics. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN for which you want to view statistics. -array_with_lun_wwuln=
1
Specifies the symbolic name of the storage array for which you want to view statistics. -array_with_name=
Specifies the folder into which individual files are created for each LUN. -csv_folder=
If existing files are already in the specified folder, this command appends the new
statistics in those files.
70 Command reference