HP MPX200 Multifunction Router - Manual (Page 21)

connect system
The connect system command verifies that the RPC connection to a router works for a specified
IP address.
Syntax
connect system -ip=IPv4 or IPv6 IP address
Example
c:\> rcli connect system -ip=10.0.0.12
create host
The create host command adds a host to the list known to the router.
Syntax
create host
Keywords
Specifies the symbolic name for the new host. -host_id
Optional. Indicates one of the following OSs: -ostype
Windows Server 2003 (default) win2k3
Windows Server 2008 win2k8
Windows Server 2012 win2k12
Linux 2.4.0 linux24
Linux 2.6.0 linux26
HP-UX (HP™UNIX™) (valid only for iSR6152) hpux
IBM™ Advanced Interactive Executive (AIX™)
aix
Novell™ NetWare
netware
Sun™ Solaris™SPARC™
solaris
Apple™Macintosh™ mac
VMware™ vmware
Open Virtual Memory System (OpenVMS) openvms
Other OS not listed here other
For an explanation of the general keywords that apply to all commands, see “General
keywords” (page 12)
Examples
c:\>rcli create host -host_id=myHost -ostype=win2k8
-ip=10.0.0.12[10.0.0.12]
Host myHost, OS Type "Microsoft Windows Server 2008" successfully added
destroy host
The destroy host command removes initiators and LUN masks for a specified host, and then
removes the host from the list known to the router.
connect system 21