HP MPX200 Multifunction Router - Manual (Page 74)

IP Datagram Reassembly Count 0 0 0 0
IP Error Packets 0
show isns
The show isns command displays iSNS information, including the IP address and port number
for the server, and whether this feature is enabled.
Syntax
show isns
Example
c:\> rcli show isns /ip=10.0.0.12
[10.0.0.12]
-enable=no
show lun
The show lun command displays detailed information either for a single LUN or for all LUNs
known to the router.
If none of the optional keywords are used, detailed information is displayed for all LUNs known
to the router.
If the -lun_number, -vpindex, and -is_target keywords are all used, detailed information
is displayed for a single LUN.
If only one or two keywords are used, detailed information is displayed for all LUNs that match
the input. For example, if only -vpgindex is used, detailed information is displayed for all LUNs
on any target that are in that VP group.
NOTE: The -lun_serial, -lun_wwuln, -lun_eui, -lun_naa, and -lun_any_wwuln
keywords are supported with router firmware Version 3.2.3.0 or later.
Syntax
show lun
Keywords
Specifies the WWPN of the storage array for which you want to view detailed
information. -array_wwpn=
If this keyword is not used, the command displays detailed information for all storage
arrays.
Specifies the Fibre Channel target WWPN of the storage array for which you want
to view detailed information. -array_with_fc_target=
Specifies the iSCSI target name of the storage array for which you want to view
detailed information. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN for which you want to view detailed information. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN for which you want to view detailed
information. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN for which you want to view detailed
information. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN for which you want
to view detailed information. -array_with_lun_serial=
1
74 Command reference