HP MPX200 Multifunction Router - Manual (Page 65)

Example
c:\> rcli show chassis /ip=10.0.0.12
[10.0.0.12]
Product Name = MPX200
Chassis Name = Multifunction Router
Serial Number = 0823E00014
Hardware Version Number = 0001
Revision Number =
Blade Slot = 1
Partner Status = PARTNER_BLADE_UP
Blade Count = 2
Slot 0, Fan 0 Status = FAN_NORMAL
Slot 0, Fan 1 Status = FAN_NORMAL
Slot 0, Fan 2 Status = FAN_NORMAL
Slot 1, Fan 0 Status = FAN_NORMAL
Slot 1, Fan 1 Status = FAN_NORMAL
Slot 1, Fan 2 Status = FAN_NORMAL
Slot 0 Power Status = POWER_ON
Slot 1 Power Status = POWER_ON
show fc
The show fc command displays fundamental information for the selected Fibre Channel port or
all Fibre Channel ports.
Syntax
show fc
Keyword
Specifies the Fibre Channel port number for which you want to view information. -port
If this keyword is not used, the command displays information for all Fibre Channel
ports.
Example
c:\> rcli show fc -port=1 /ip=10.0.0.12
[10.0.0.12]
Port = FC1
Port Status = PORT_ENABLED
Link Status = LINK_UP
Current Link Rate = 4Gb
Programmed Link Rate = Auto
Connection Mode = Point-to-Point
FibreChannel Mode = FCP
Firmware Revision = 5.03.14
1st VP Group
WWPN = 2100-00C0-DD12-F95C
WWNN = 2000-00C0-DD12-F95C
Port ID = 01-13-00
2nd VP Group
WWPN = 2101-00C0-DD12-F95C
WWNN = 2001-00C0-DD12-F95C
Port ID = 01-13-01
3rd VP Group
WWPN = 2102-00C0-DD12-F95C
WWNN = 2002-00C0-DD12-F95C
Port ID = 01-13-02
4th VP Group
show fc 65