HP MPX200 Multifunction Router - Manual (Page 66)

WWPN = 2103-00C0-DD12-F95C
WWNN = 2003-00C0-DD12-F95C
Port ID = 01-13-04
show fc_adv
The show fc_adv command displays detailed information (including the frame size, execution
throttle, connection type, and port mode) for the selected Fibre Channel port or all Fibre Channel
ports.
Syntax
show fc_adv
Keywords
Specifies the Fibre Channel port number for which you want to view advanced
information. -port
If no port number is specified, advanced information is displayed for all Fibre Channel
ports.
Example
c:\> rcli show fc_adv -port=1 /ip=10.0.0.12
[10.0.0.12]
Frame Size = 2048
Execution Throttle = 256
Programmed Connection Option = Loop Preferred
Advanced Port Mode = FCP
show fc_statistics
The show fc_statistics command samples Fibre Channel Port statistics and displays the
result.
Syntax
show fc_statistics
Keywords
Identifies a folder into which an individual file containing csv files is created for
each port. Files are created, or appended to if they already exist. -csv_folder=
Example
c:\> rcli show fc_statistics fc_stat /ip=10.0.0.12
[10.0.0.12]
Fibre Channel Port FC1 FC2 FC3 FC4
Interrupt Count 284194 85771 85062 85949
Target Command Count 0 0 0 158
Initiator Command Count 199403 150 0 0
Link Failure Count 0 0 0 0
Loss of Sync Count 0 0 0 0
Loss of Signal Count 0 0 0 0
Primitive Sequence Error Count 0 0 0 1
Invalid Transmission Word Count 0 0 0 0
Invalid CRC Error Count 0 0 0 0
show fcip_route
The show fcip_route command displays fundamental information for all FCIP routes or a
specified FCIP route.
66 Command reference