HP MPX200 Multifunction Router - Manual (Page 78)

show notification
The show notification command displays the notification feature configuration and one or
more profiles.
Each profile lists email addresses to which notices are sent if a specific event occurs.
Syntax
show notification
Keywords
Specifies a notification profile name. -name=
If this keyword is not used, all profiles are displayed.
Example
c:\> rcli show notification -name="my Profile" /ip=10.0.0.12
[10.0.0.12]
-name="my Profile"
show ntp
The show ntp command displays NTP information for the router.
Syntax
show ntp
Keywords
Specifies a single array index for an NTP server address. -index=
If this keyword is not used, all valid NTP server addresses are displayed.
Example
c:\> rcli show ntp /ip=10.0.0.12
[10.0.0.12]
-index=0 -ntp_ipaddr=10.0.0.100 -tz_hours=-8 -tz_mins=0
-index=1 -ntp_ipaddr=0.0.0.0 -tz_hours=-8 -tz_mins=0
-index=2 -ntp_ipaddr=0.0.0.0 -tz_hours=-8 -tz_mins=0
show performance
The command samples port performance data over a specified interval and displays the result in
per-second units.
Syntax
show performance
Keywords
If used, an individual file containing csv files is created for each port. Files are
created, or appended to if they already exist. -csv_folder=
Specifies the time, in seconds, for performance data collection. -seconds=
Regardless of the length of this interval, results are displayed in per-second units.
78 Command reference