HP MPX200 Multifunction Router - Manual (Page 101)

Specifies the LUN for which you want to view detailed information. -lun_number=
2
Specifies the LUN Page 0x80 serial number. -lun_serial=
3
The serial number can contain special characters. To ensure that these characters are
interpreted correctly when running in a Linux shell, be sure to enclose the input text
for Page 0x80 serial numbers in single quotation marks (not double quotation marks).
Specifies the LUN T10 designator. -lun_tten=
3
Specifies the LUN WWULN. -lun_wwuln=
3
Specifies the VP group index number. -vpgindex=
2
1
Do not combine the keywords -array_with_lun_serial, -array_with_lun_wwuln, -array_with_lun_tten,
-array_with_lun_eui , and -array_with_lun_naa. To specify any LUN, use the -array_with_lun_any_wwuln
keyword.
2
If the -lun_number, -vpindex, and -is_target keywords are all used, detailed information is displayed for a
single LUN.
3
Do not combine the keywords -lun_serial, -lun_wwuln, -lun_tten, -lun_eui and -lun_naa. To specify any
LUN, use the -lun_any_wwuln keyword.
Example
c:\> rcli show dml -lun_number=2 -vpgindex=1 -fc_target=5001-4380-025D-A83A
/ip=10.0.0.12
[10.0.0.12]
Target = 5001-4380-025D-A83A
show migration
The show migration command displays detailed information about one or more data migration
jobs.
If you use the -dm_jobidkeyword, the -statekeyword is ignored.
Syntax
show migration
Keywords
Specifies the ID of a data migration job to view. -dm_jobid=
Specifies the status of data migration jobs to view. Values are: -state=
•
all (default)
•
completed
•
failed
•
paused
•
running
•
serial scheduled
Example
c:\> rcli show migration -dm_jobid=0 /ip=10.0.0.12
[10.0.0.12]
DM Job ID number = 0
DM Job Name = HP HSV200-0:VPG1:002 to NETAPP LUN-1:VPG1:002
Copy Completed
Transfer Speed Estimate = 75 MB/sec
Start time = 04/08/2010 15:19:55
End time = 04/08/2010 15:42:25
show migration 101