HP MPX200 Multifunction Router - Manual (Page 37)

modify initiator
The modify initiator command changes the OS type for an existing initiator.
Syntax
modify initiator
Keywords
Required, unless the -is_initiator keyword is used instead. -fc_initiator=
Specifies the Fibre Channel initiator name for which you want to add a LUN mask.
Required, unless the -fc_initiator keyword is used instead. -is_initiator=
Specifies the iSCSI initiator name for which you want to add a LUN mask.
Optional for both iSCSI and Fibre Channel initiators. -ostype=
Indicates the operating system. Values are:
Windows Server 2003 (default) win2k3
Windows Server 2008 win2k8
Linux 2.4 linux24
Linux 2.6 linux26
Hewlett Packard UNIX (HP-UX) hpux
IBM Advanced Interactive eXecutive (AIX) aix
Novell NetWare netware
Sun Solaris SPARC solaris
Apple Macintosh mac
VMware vmware
Open Virtual Memory System (OpenVMS) openvms
Other OS not listed here Other
NOTE: You must specify either the -fc_initiator or -is_initiator keyword, but not
both.
Example
c:\> rcli modify initiator
-is_initiator=iqn.1991-05.com.microsoft:abcdef12 -ostype=win2k8
/ip=10.0.0.12
[10.0.0.12]
-is_initiator=iqn.1991-05.com.microsoft:abcdef12
-iscsi_name=iqn.1991-05.com.microsoft:abcdef12 -ostype=win2k8
(Logged Out)
modify migration
The modify migration command forces the specified migration job to failover to a specified
job owner (blade 1 or blade 2). Although a failure causes failover to occur automatically, this
command allows you to manually cause a failover.
Syntax
modify migration -owner=blade_1 | blade_2
modify initiator 37