HP MPX200 Multifunction Router - Manual (Page 63)

NOTE: This command is not supported for MPX100 routers.
Syntax
set vp_group -vpgindex=index number
Keywords
Specifies whether VP group names are allowed. Values are: -enable=
• yes
•
no
• on
•
off
•
true
• false
The default is the current setting on the router.
Specifies a new name for the VP group indicated by the -vpindex keyword. The
default is the current setting on the router. -name=
Example
c:\> rcli set vp_group -vpgindex=1 -enable=yes -name="MyVpGroup"
/ip=10.0.0.12
Virtual Port Group 1 successfully configured
show append
The command displays a named set of keywords that can be included as a group for any RCLI
command by including the /append= keyword. If the -append keyword is not included, this
command displays all sets.
Syntax
show append
Keyword
Specifies the name of a keyword set to display. -append=
Example
c:\> rcli show append
-append="testset" --> "-quiet -text="c:\temp\test_show_system.txt" "
show array
The show array command displays detailed information for one or more storage arrays.
For a list of names of all storage arrays known to the router, use the list array command. See “list
array” (page 27) .
NOTE: This command is supported with router firmware Version 3.2.0.0 or later.
Syntax
show array
show append 63