HP MPX200 Multifunction Router - Manual (Page 100)

Example
c:\> rcli show dm_group -name="Group 0" /ip=10.0.0.12
[10.0.0.12]
DM Job Group "Group 0"
show dml
The show dml command displays detailed information for a single DML or for all DMLs known
to the router.
If none of the optional keywords are used, detailed information is displayed for all LUNs known
to the router.
Some identifiers are not necessarily unique to a single LUN. Therefore, identifying keywords can
apply to more than one LUN and detailed information is displayed for all LUNs that match the
input.
You can use the -fc_target, -is_target, or any of the array-specific keywords, but you must
not combine these keywords.
Syntax
show dml
Keywords
Specifies the WWPN of the storage array for which you want to view detailed
information. -array_wwpn=
If this keyword is not used, the command displays detailed information for all storage
arrays.
Specifies the Fibre Channel target WWPN of the storage array for which you want
to view detailed information. -array_with_fc_target=
Specifies the iSCSI target name of the storage array for which you want to view
detailed information. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN for which you want to view detailed information. -array_with_lun_any_wwuln-
Specifies the EUI of the storage array LUN for which you want to view detailed
information. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN for which you want to view detailed
information. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN for which you want
to view detailed information. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN for which you want to view
detailed information. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN for which you want to view detailed
information. -array_with_lun_wwuln=
1
Specifies the symbolic name of the storage array for which you want to view detailed
information. -array_with_name=
Limits the list to the LUNs from the specified Fibre Channel target. -fc_target=
Limits the list to the LUNs from the specified iSCSI target. -is_target=
2
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
Specifies the LUN’s EUI designator. -lun_eui=
3
Specifies the LUN NAA designator. -lun_naa=
3
100 Data Migration commands