HP MPX200 Multifunction Router - Manual (Page 35)

Specifies the IPv4 gateway address or the IPv6 default router address.
The default is as currently set on the router. -gateway_ip=
Specifies the Ethernet port number. -ge_port=
The default is as currently set on the router.
Specifies the IPv4 subnet mask to be associated with -local_ip.
NOTE: This keyword is ignored if -local_ip is an IPv6 address.
-ipv4_subnet=
Specifies the local IPv4 or IPv6 address. -local_ip=
Specifies the MTU size for the iSCSI port. -mtu_size=
•
min (minimum)
•
normal (default)
•
max (maximum)
•
jumbo (jumbo frames)
•
A number ranging from 582 to 9000
Specifies the port speed in Mb/s the values are: -port_speed=
•
auto
•
100
•
1000
•
10000
The default is as currently set on the router.
Specifies the IPv4 or IPv6 address at the other end of the route.
The default is as currently set on the router. -remote_ip=
1
Enables use of software compression for the newly-created route. Values are: -swcompress_enable=
•
yes (default)
•
no
•
on
•
off
•
true
•
false
The default value is as currently set on the router.
Specifies the TCP port number. -tcp_port=
The default is as currently set on the router.
Specifies the TCP window size for the iSCSI port. Values are: -tcpwindow=
•
8192
•
16384
•
32768
•
65536
•
131072
•
262144
•
524288
•
16777216
•
2097152
•
4194304
•
8388608
•
1048576
The default is as currently set on the router.
modify fcip_route 35