HP MPX200 Multifunction Router - Manual (Page 23)

Specifies the iSCSI target name of the storage array for which you want to stop
collecting data. -array_with_is_target=
Specifies the WWULN, T10, NAA, EUI, or Page 0x80 serial number of the storage
array LUN for which you want to stop collecting data. -array_with_lun_any_wwuln=
Specifies the EUI of the storage array LUN for which you want to stop collecting
data. -array_with_lun_eui=
1
Specifies the NAA of the storage array LUN for which you want to stop collecting
data. -array_with_lun_naa=
1
Specifies the Page 0x80 serial number of the storage array LUN for which you want
to stop collecting data. -array_with_lun_serial=
1
Specifies the T10 designator of the storage array LUN for which you want to stop
collecting data. -array_with_lun_tten=
1
Specifies the WWULN of the storage array LUN for which you want to stop collecting
data. -array_with_lun_wwuln=
1
Specifies the symbolic name of the storage array for which you want to stop collecting
data. -array_with_name=
Specifies the name of the Fibre Channel target. -fc_target=
Specifies the name of the iSCSI target. -is_target=
Accepts the LUN name in a variety of formats that are interpreted first as WWULN,
and then as the T10, NAA, EUI, and Page 0x80 serial number designator until at
least one LUN is found. -lun_any_wwuln=
2
Specifies the LUN EUI. -lun_eui=
2, 3
Specifies the LUN NAA designator. -lun_naa=
2, 3
Specifies the LUN for which you want to disable the collection of statistics. -lun_number=
Specifies the LUN Page 0x80 serial number. -lun_serial=
2, 3
The serial number may contain special characters, for example, "xxx$-xxx".
Because these characters could be interpreted incorrectly, when running in a Linux
shell always enclose the input text for Page 0x80 serial numbers within single
quotation marks ('') instead of double quotation marks ("").
Specifies the LUN T10 designator. -lun_tten=
3
Specifies the LUN WWULN. -lun_wwuln=
2, 3
Specifies the VP group index number. -vpgindex=
1
Do not combine the keywords -array_with_lun_serial, -array_with_lun_wwuln, -array_with_lun_tten,
-array_with_lun_eui , and -array_with_lun_naa. To specify any LUN, use the -array_with_lun_any_wwuln
keyword.
2
This keyword is supported with firmware version 3.2.3.0 or later.
3
Do not combine the keywords -lun_serial, -lun_wwuln, -lun_tten, -lun_eui, and -lun_naa. To disable I/O
statistics on all LUNs, use the -lun_any_wwuln keyword.
NOTE:
•
You can specify either the -fc_target or the -is_target keyword, but not both.
•
This command requires router firmware version 3.1.0.0 or later.
•
To use this command with the -lun_serial, -lun_wwuln, -lun_eui, -lun_naa, or
-lun_any_wwuln
keyword requires router firmware version 3.2.3.0 or later.
Example
c:\> rcli disable io_statistics -all /ip=10.0.0.12
I/O statistic collection successfully disabled for all LUNs
disable io_statistics 23