HP MPX200 Multifunction Router - Manual (Page 54)

Specifies the MTU size for the iSCSI port. Values are: -mtu_size
•
min (minimum)
• normal (default)
•
jumbo (jumbo frames)
• max (maximum)
•
an integer in the range of 582–9000
The default value is set on the router.
Specifies the TCP window size for the iSCSI port. The default value is set on the
router. The maximum TCP window size must be: -tcpwindow
• a power of 2 (for example, 8192 or 16384)
•
≤ 16777216 for firmware version 3.3.0.0 or later
• ≤ 1048576 for earlier firmware versions
Values are:
•
8192
•
16384
• 32768
•
65536
• 131072
•
262144
•
524288
• 1048576
•
2097152
• 4194304
•
8388608
•
16777216
Example
c:\> rcli set iscsi_adv -port=1 -mtu_size=jumbo -tcpwindow=65536
/ip=10.0.0.12 iSCSI
Port 1 advanced info successfully configured
set isns
The set isns command enables or disables iSNS, and if iSNS is enabled, allows setting the
iSNS IP address and TCP port.
Syntax
set isns
Keywords
Enables or disables iSNS. When iSNS is enabled, you can set the IP address and
TCP port. Values are: -enable
•
yes
•
no
• on
•
off
• true
•
false
54 Command reference