HP MPX200 Multifunction Router - Manual (Page 72)

Keywords
Specifies the port number for the iSCSI port for which you want to view basic
information. -port=
If this keyword is not used, basic information is displayed for all iSCSI ports.
Example
c:\> rcli show iscsi /ip=10.0.0.12
[10.0.0.12]
Port = GE1
Port Status = Enabled
Link Status = Down
Flow Control = Disabled
Number of open connections = 0
iSCSI Port name = iqn.1986-03.com.hp:fcgw.mpx200.0823e00014.b1.0
Firmware Revision = 3.00.01.57
Driver Revision =
Current Port Speed = Unknown
Programmed Port Speed = Auto
MAC Address = 00-c0-dd-12-f9-5c
IPv4 Address = 0.0.0.0
IPv4 Subnet Mask = 0.0.0.0
IPv4 Gateway Address = 0.0.0.0
IPv6 is Disabled
Port = GE2
...
show iscsi_adv
The show iscsi_adv command displays advanced information for a specified iSCSI port or all
iSCSI ports.
Syntax
show iscsi_adv
Keywords
Specifies the port number for the iSCSI port for which you want to view advanced
information. If not used, advanced information is displayed for all iSCSI ports. -port=
Example
c:\> rcli show iscsi_adv -port=1 /ip=10.0.0.12
[10.0.0.12]
Advanced Info for iSCSI Port 1
Header Digest: Disabled
Data Digest: Disabled
CHAP: Disabled
MTU Size 1500
TCP Window Max Size TCPWINDOWSIZE_32768
Connections (free/total): 256 / 256
show iscsi_statistics
The show iscsi_statistics command samples iSCSI port statistics and displays the result.
72 Command reference