HP MPX200 Multifunction Router - Manual (Page 69)

FCIP SACK Capable No License Needed
DM Offline Capable No License Needed
DM Online Capable No License Needed
DM Capacity Capable 10240 GB Issued, 0 GB Used, 0 GB In-Use
DM Array Capable 9 Array Issued, 1 Used
show host
The show host command displays detailed information for a single host. To view all hosts known
to the router, use the list host command instead.
Syntax
show host
Keywords
Specifies the symbolic name for the host. -host_id
For an explanation of the general keywords that apply to all commands, see “General keywords”
(page 12)
Examples
c:\>rcli show host -host_id=myHost /-ip=10.0.0.12[10.0.0.12]
—host_id=myHost —ostype=win2k8
Operating System Type = Microsoft Windows Server 2008
(Host Logged Out)
show initiator
The show initiator command displays detailed information for a specified initiator.
To view all initiators known to the router, use the list initiator command instead.
NOTE: Do not use both -fc_initiator and -is_initiator keywords.
If neither keyword is used, detailed information is displayed for all initiators.
Syntax
show initiator
Keywords
Specifies the name of the Fibre Channel initiator about which to display details. -fc_initiator=
Specifies the name of the iSCSI initiator about which to display details. -is_initiator=
Example
c:\> rcli show initiator -is_initiator=iqn.1991-05.com.microsoft:abcdef12
/ip=10.0.0.12
[10.0.0.12]
-is_initiator=iqn.1991-05.com.microsoft:abcdef12
-iscsi_name=iqn.1991-05.com.microsoft:abcdef12 -ostype=win2k3
(Logged Out)
iSCSI Target
IPv4 Address = 0.0.0.0
IPv6 Address = 0:0:0:0:0:0:0:0
iSCSI Name = iqn.1991-05.com.microsoft:abcdef12
iSCSI Alias =
show host 69