HP VMA-series Memory Arrays - Manual (Page 98)

98 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
In the following example, the media block id all enable command enables
all storage media devices on the local HP VMA SAN Gateway:
no media block id all enable
To disable the use of all media devices in the HP VMA SAN Gateway, use the no
form of the above command in Config mode.
Caution: When all media devices on an HP VMA SAN Gateway are disabled,
applications using those devices immediately stop using them and will have space
allocated for them on other HP VMA SAN Gateways. This may be a disruptive
operation.
In the following example, the no media block id all enable command
disables all block storage media devices on the local HP VMA SAN Gateway:
Show Media Health Commands
The health option of the show media command returns information about the
status and expected lifetime of media devices. The option can be included with
other options in various forms in any order.
• show media health
• show media health [all] [detail] [global]
SM076 [NJ-Lab-vSHARE00: standby] (config) # media block id
all enable
Enabling 23108R00000043
Enabling Strad134
* gateway02 [cluster1: master] (config) # no media block id
all enable
Warning: this command will cause users of this media to
reset and lose all content.
Confirm command? [no] yes
Disabling VTMS0101-2
Disabling VTMS0101-4
* gateway02 [cluster1: master] (config) #
█