HP VMA-series Memory Arrays - Manual (Page 210)

210 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
The Name of the New Group dialog box appears.
3. Enter a name in the dialog box and click the OK button.
The new initiator group is displayed in the Initiator Group table.
To delete an initiator group:
1. Select vSHARE > Manage Initiators in the VMA Web Interface.
The Initiator Management page appears.
2. Select one or more initiator groups in the Initiator Groups table.
3. Click the Remove Checked iGroup(s) button.
The initiator group is removed from the Initiator Group table.
Adding or Removing Initiators to Initiator Groups
Every FC initiator has a protocol-specific identifier.
• Fibre Channel initiators are identified by World-Wide Names (WWN). Fibre
Channel initiators are fixed by the appropriate HBA port.
To add an initiator to an initiator group:
1. Select vSHARE > Manage Initiators in the VMA Web Interface.
The Initiator Management page appears.
2. Select an initiator group in the Initiator Groups table.
3. Enter one or more initiator identifiers in the Initiators in Initiator Group list.
Multiple initiators must be separated by returns.
4. Click the Save button.
Target Management
In a vSHARE HP VMA SAN Gateway cluster, each HP VMA SAN Gateway
operates as a SAN (Fibre Channel) target which provides access to the LUNs stored
on its attached VMA Arrays.