HP VMA-series Memory Arrays - Manual (Page 145)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 145
Exit Config mode and return to enable mode.
exit
Exit the current mode. From Config mode, go to enable mode. From enable or
standard mode, log out of the system. Note that to go from enable mode to standard
mode, the disable command must be used.
help
Display a general CLI help message.
Web Proxy Settings
web proxy host [port ]
no web proxy
If desired on a http or ftp download, a proxy can be specified. If no port is specified,
the default is 1080.
Xinetd Server Settings
[no] telnet-server enable
Enable/disable the telnet server.
show telnet-server
Show telnet server settings.
[no] ftp-server enable
Enable/disable the FTP server.
show ftp-server
Show FTP server settings.
tcpdump Capture Files
show files tcpdump
Display a list of tcpdump capture files.