HP VMA-series Memory Arrays - Manual (Page 110)

110 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
2. Select one or more initiator groups in the Initiator Groups table.
3. Click the Remove Checked iGroup(s) button.
The initiator group is removed from the Initiator Group table.
Adding or Removing Initiators to Initiator Groups
Fibre Channel initiators are identified by World-Wide Names (WWN). Fibre
Channel initiators are fixed by the appropriate HBA port.
To add an initiator to an initiator group:
1. Select vSHARE > Manage Initiators in the VMA Web Interface.
The Initiator Management page appears.
2. Select an initiator group in the Initiator Groups table.
3. Enter one or more initiator identifiers in the Initiators in Initiator Group list.
Multiple initiators must be separated by returns.
4. Click the Save button.
Managing Targets
In a vSHARE HP VMA SAN Gateway cluster, each HP VMA SAN Gateway
operates as a SAN (Fibre Channel) target which provides access to the LUNs stored
on its attached VMA Arrays.
The Target Management page displays tools which enable you to view information
about Fibre Channel target ports.
Figure 5.4 Target Management Page