HP VMA-series Memory Arrays - Manual (Page 152)

152 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
Name Resolution Commands
hostname
no hostname
Set or clear the system hostname.
[no] ip name-server
[no] ip domain-list
[no] ip host
The commands configure DNS servers, specifies which domain(s) to try
unqualified hostnames in, and defines hostname/IP mappings for /ETC/HOSTS .
show hosts
Show all values configured by the group of commands above: hostname, name
servers, domain name list, and static host mappings.
Routing Commands
ip route
no ip route [address>]
Set or remove a static route. If it is called with only a network prefix and mask, it
deletes all routes for that prefix.
show ip route
Display the routing table in the system, which includes dynamic routes as well as
any active static routes.
show ip route static
Display the list of configured static routes
Additional CLI Commands
ARP Configuration
arp
Add a static entry to the ARP cache.