Targets, Initiator groups – HP VMA-series Memory Arrays User Manual
Page 171
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
171
The
show containers
command displays all containers created within a VMA
Array enabled for block storage.
Targets
Show Targets Command
show targets [node
[protocol fc] [id
The
show targets
command displays all Fibre Channel. Use the
hostname
,
protocol
, and
id
parameters to filter the targets returned.
The command returns the node, hostname, target port, status (enabled or not), and
address (WWN). The
detail
parameter returns the network bindings for each
target.
Initiator Groups
igroup Create Command
[no] igroup create name
The
igroup create
command creates an initiator group and, optionally, one or
more or Fibre Channel initiators. Fibre Channel initiator identifiers (WWNs) are
generated automatically by an HBA.
> enable
# show targets
Node Hostname Proto Target Enab Address
------------------------------------------------------------------------------
1 lab-n1 fc hba-a1 yes wwn.21:00:00:1b:32:9b:83:3b
1 lab-n1 fc hba-a2 yes wwn.21:01:00:1b:32:bb:83:3b
1 lab-n1 iscsi iscsi yes iqn.2004-02.com.vmem:lab-n1
1 lab-n1 iscsi targ2 yes iqn.2004-02.com.vmem:lab-n1:targ2
2 lab-n2 fc hba-a1 yes wwn.21:00:00:1b:32:9f:f3:ce
2 lab-n2 fc hba-a2 yes wwn.21:01:00:1b:32:bf:f3:ce
2 lab-n2 iscsi iscsi yes iqn.2004-02.com.vmem:lab-n2
2 lab-n2 iscsi targ2 yes iqn.2004-02.com.vmem:lab-n2:targ2