HP VMA-series Memory Arrays - Manual (Page 28)

28 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
Required Installation Tools
The following tools are required during the installation process:
• Null Modem Cable or KVM (Keyboard/Video/Mouse) access to console.
• Network requirements: The HP VMA SAN Gateway uses Gbit Ethernet for
management and cluster network connections.
Front View
The front panel has Power and Reset buttons that allow you to start, stop, or reset
the HP VMA SAN Gateway.
Caution: Using the Power button to turn off the system power removes the main
power but keeps standby power. Before servicing, you must therefore unplug the
system.
The following LEDs are present on the HP VMA SAN Gateway:
• NIC1-4
• Power supplies 1 and 2
• Overtemp
• DIMM status
• Processor status
• Fan status
• HDD
• Power