HP VMA-series Memory Arrays User Manual
Page 75
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
75
2.
To add additional initiators to an initiator group, use the
igroup addto
command.
You can also add two Fibre Channel initiators to the same initiator group.
.
Fibre Channel initiator identifiers (WWN) are fixed by the HBA port. If you
want to restrict LUN access to a particular Fibre Channel initiator, you must
get the appropriate the WWN from the Fibre Channel HBAs on the client
machine.
3.
To confirm that initiators were added to the initiator group, return to the CLI
and run the
show igroups
command.
The
show igroups
command shows all initiator groups, the number of
initiators within each group, and the WWN of those initiators.
igroup create Command
The
igroup create
command creates an initiator group and, optionally, one or
more Fibre Channel initiators. Fibre Channel initiator identifiers (WWNs) are
generated automatically by an HBA.
Syntax
[no] igroup create name
(config) # igroup addto name
wwn.21:01:00:1b:32:ba:18:65
(config) # igroup addto name
wwn.21:00:00:1b:32:9a:18:65 wwn.21:01:00:1b:32:ba:18:65
(config) # exit
# show igroups
Initiator group:
iqn.2004-02.com.vmem:initiator1
iqn.2004-02.com.vmem:initiator2
wwn.21:00:00:1b:32:9a:18:65
wwn.21:01:00:1b:32:ba:18:65