HP VMA-series Memory Arrays - Manual (Page 161)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 161
... commands, which have no confirmations in any case, since they are explicitly
dealing with configuration.
[no] cli default confirm reload
Enable or disable confirmations of rebooting or halting the system using the
'reload' command. This confirmation is in addition to any separate confirmations
that may be displayed for unsaved changes.
Override the auto-detected size of the terminal. This is useful mostly when the size
could not be auto-detected and the CLI is using the default 80x24.
These settings are persistent only for the current CLI session. They are also lost if
the terminal is resized and the CLI is able to auto-detect its new size.
Note that the commands without the cli session prefix are identical to those
with the prefix, and are present only for Cisco compatibility.
cli session terminal type
no cli session terminal type
terminal type
no terminal type
Set the type of the terminal. The 'no' variants clear the terminal setting, which will
cause the session to be treated as a “dumb” terminal.
Note that the commands without the cli session prefix are identical to those
with the prefix, and are present only for Cisco compatibility.
cli clear-history
Clears the command history of the current user.
show cli
cli session terminal width
cli session terminal length
terminal width
terminal length