HP VMA-series Memory Arrays - Manual (Page 268)

268 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
Regulatory Information
For your protection, this product has been tested for conformance to various
national and international regulations and standards. The scope of this regulatory
testing includes electrical and mechanical safety, electromagnetic emissions,
immunity, acoustics and hazardous materials.
Regulatory Model Number
For the purpose of regulatory compliance certifications and identification, this
product is assigned a regulatory model number. When requesting certification
information for this product, always refer to this regulatory model number.
Note: Do not confuse the regulatory model number with the marketing or model
number.
Installation Conditions
See installation instructions before connecting this equipment to the input supply.
WARNING! The equipment must be provided with a proper AC protective earth
(PE) ground connection.
Network Connected Equipment
WARNING! The installation must provide a ground connection for the network
equipment.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly, you must observe the
following antistatic precautions to prevent damage. An ESD kit (P/N A3024-
80004) is available (or supplied with memory additions). This kit contains one
wrist strap, one conductive sheet, and one antistatic foam pad.
• Always disconnect power from the server and wear a grounded wrist strap
when working around the server.