HP VMA-series Memory Arrays - Manual (Page 126)

126 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
occur at the same time it was previously scheduled for. Naturally, if the auto-
rotation was based on size, this will delay it somewhat as it reduces the size of the
active log file to zero.
logging files delete oldest []
Force the immediate deletion of the specified number of the oldest log files.
logging files upload {current, }
Upload a log file to a remote host. The word current specifies the current log file.
To specify an archived log file, give its number instead, as displayed by show log
files .
The current log file will have the name messages if you don’t specify a new name
for it in the upload URL. The archived log files will have the name
messages..gz if you don’t specify a new name in the URL, and will be
compressed with gzip regardless.
Note: Files are uploaded from all gateways simultaneously. Therefore, care should
be taken to allow that many simultaneous connections on the server accepting the
files (for example, increase the maximum open ftp connections parameter).
logging files upload-auto
Enable automatic upload of log files to a remote host. The control parameters are
used to control interval and information gathered. Control parameters are:
Enable Enable automatic log gathering.
Immediate
{current, number>} One-shot upload of logs to the configured site.
include-cinfo Enable inclusion of cache information during log
gathering.
include-dump Enable inclusion of sysdump information during log
gathering.
interval
Set how often to gather logs, in hours.
max-size size> Set the maximum uploadable file size, in MB.