HP VMA-series Memory Arrays - Manual (Page 62)

62 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
The show configuration running full command displays all commands,
including any default settings, to reproduce the state of the current running
configuration.
show configuration unsaved
The show configuration unsaved command displays commands that have
been configured, but not yet saved in the configuration file.
User passwords cannot be recovered with a show configuration command (or
similar command) unless the passwords are encrypted. For more information, see
the command username password in User Accounts and Local
Authentication on page 128.
Reverting to Saved Configuration Files
If you do not want to keep the current changes, you can revert to the last saved
configuration or apply an inactive configuration file to the VMA-series SAN
Gateway using the configuration revert saved command.
In the following example, the command undoes recent changes and returns to the
configuration saved in the active configuration file:
In the VMA Web Interface, you can select any available configuration file in the
Cluster Administration page and click the Apply button to apply its configuration
to the VMA-series SAN Gateway. For more information, see Cluster
Administration Page on page 193.
Delete, Move, or Copy a Configuration File
To delete, move (rename), or copy an inactive configuration file, use the following
commands in the CLI:
• configuration delete
• configuration move
• configuration copy
gateway02 [cluster1: master] (config) # configuration revert
saved
gateway02 [cluster1: master] (config) # █