HP VMA-series Memory Arrays User Manual
Page 139
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
139
Show Stats CPU
show stats cpu
Display some basic stats about CPU utilization: the current level, the peak over the
past hour, and the average over the last hour.
Show Stats FC
show stats fc [on (hostname
[detail] [port
Shows fibre channel statistics values. Zero, one, or more than one port can be
specified. If no host is specified, FC ports at the local host are shown. Use the
global
parameter to show all the fc port statistics values at the cluster. Both host-
id and port-id can be combined to select specific ports at a specific host to display.
Stats Export
stats export
[after
Export statistics to file. Currently the only supported value for
is
csv
(comma-separated value). The dataset to be exported is determined by the
.
If a filename is specified, the stats will be exported to a file of that name; otherwise
a name will be chosen automatically and will contain the name of the report and the
time and date of the export. Any automatically-chosen name will be given a CSV
extension. If the user specifies a name,
.csv
will be added if it is not already part
of the name.
Either one, both, or neither of the
after
and
before
parameters may be
specified. These place boundaries on the timestamps of the instances to be
exported. When one of these parameters is specified, two words must follow, one
for the date and one for the time. A hyphen (
-
) may be used in the
field
as an abbreviation for midnight. The date and time specified are interpreted as local
time according to the currently configured timezone. As elsewhere in the system,
the date format must be
yyyy/mm/dd
, the time format must be
hh:mm
in 24-hour
time.