HP VMA-series Memory Arrays - Manual (Page 228)

228 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
Returns
The vstat utility returns the following information.
-- Target Status --
Status LED: ON
Alarm LED: OFF
PWR_A LED: ON
PWR_B LED: OFF
ready: 1
formatting: 0
format_done: 0
paused: 0
link: 1
lid_ajar: 0
raid_rebuild: 0
write_buffer: 1
linkwidth: 8
maxlinkwidth: 8
cur_payload: 128
max_payload: 1024
cur_read_req: 512
dma_active: 569
io_pend: 525
Status LED Indicates whether the Status LED is on or not.
Alarm LED Indicates whether the Alarm LED is on or not.
If it is on, it indicates the status of the LED
flashing.
PWR_A LED Indicates whether the Power A LED is on or
not.
PWR_B LED Indicates whether the Power B LED is on or
not.
ready Indicates whether the data plane is online and
ready or offline.
formatting Indicates if formatting of the VIMMs is in
progress or not. This is only applicable to flash
VIMM systems.
format_done Indicates the progress percentage done during
formatting of the VIMMs.