HP VMA-series Memory Arrays - Manual (Page 142)

142 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
On a system with clustering, only save the configuration on the local box instead
of attempting to save on all cluster members.
configuration delete
configuration move
configuration copy
Delete, move (rename), or copy a configuration file. These do not affect the current
running configuration. The active configuration file may not be deleted or
renamed, nor may it be the target of a move or copy. It may be the source of a copy,
in which case the original remains active.
configuration fetch []
Download a configuration file from a remote host.
configuration upload
configuration upload active
Download or upload a configuration file. A file may not be downloaded over the
active configuration file. If no name is specified for a configuration fetch, it is
given the same name as it had on the server. If active is specified for a
configuration upload, the currently-active configuration file is uploaded. No
configuration file may have the name active .
See Key to Command Parameters on page 120 for a description of valid URLs.
Note: If downloading configuration files from another system running the
vCLUSTER management system, they can be found in the /config/db directory.
So an example command line to fetch the initial configuration database would
be: configuration fetch scp://admin:password@hostname/config/db/
initial write memory
Same as configuration write , provided for Cisco compatibility.
write memory local
Same as configuration write local , provided for Cisco compatibility.
write terminal
Same as show running-config , provided for Cisco compatibility.
configuration jump-start