HP VMA-series Memory Arrays - Manual (Page 113)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 113
APPENDIX A:
Command Line Interface
Web: For information about using the VMA Web Interface as an alternative to
the CLI, see APPENDIX B: VMA Web Interface Reference on page 177.
Using the Command Line Interface
The CLI can be used to perform all of the functions provided in the VMA Web
Interface, as well as other functions that are not available in the VMA Web
Interface. Depending on the user’s current access mode (described in Command
Modes on page 117), a subset of commands is available for configuring, managing,
and viewing information about the HP VMA SAN Gateway.
Note: This guide only documents commands that are needed for the HP VMA SAN
Gateway and some other general-purpose commands. See Quick Reference to
Commands on page 173 for a list of the commands that are documented in this
chapter.
CLI Shorthand Method
Commands can be expressed in shorthand form in the CLI. Each keyword can be
abbreviated by omitting its final letters, as long as the remaining letters are unique