HP VMA-series Memory Arrays - Manual (Page 76)

76 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
Syntax Description
Examples
The following examples demonstrate how the igroup create and igroup
addto commands may be used to manage initiator groups and initiators.
The command adds the three initiators to an initiator group named FINANCE:
The Cisco-style no prefix may be used to delete initiator groups or initiators. In the
following example, the command deletes the igroup FINANCE.
The following command removes the initiator named
wwn.20:20:20:20:20:20:20:20 from igroup FINANCE and preserves the other two
initiators (wwn.20:20:20:20:20:20:20:21 wwn.20:20:20:20:20:20:20:22).
igroup addto Command
The igroup addto command adds one or more initiators to a group.
Syntax
[no] igroup addto initiators [initiator_name …]
Creating LUNs
The fourth step in configuring the vSHARE system is to create the LUNs. In
vSHARE, LUNs are addressable subsets of the flash memory within a container
name The name is alphanumeric only.
initiator_name The initiator_name must be prefixed with
"wwn." (FC initiators).
Table 4.2 igroup create Command
igroup create name FINANCE initiators
wwn.20:20:20:20:20:20:20:20 wwn.20:20:20:20:20:20:20:21
wwn.20:20:20:20:20:20:20:22
no igroup create name FINANCE
no igroup addto FINANCE initiators
wwn.20:20:20:20:20:20:20:20