HP VMA-series Memory Arrays - Manual (Page 244)

244 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
cpu-util-high 98 Percent an HP VMA SAN Gateway
has detected that a CPU has
exceeded utilization above
the threshold level Please contact HP customer
support if the system is not
under full data traffic load. Low
disk-space-low 0 Percent
Free an HP VMA SAN Gateway
disk space has crossed the
threshold of percent of bytes
free. Please contact HP customer
support. Medium
interface-down Event Triggered A network interface on an
HP VMA SAN Gateway has
lost link. Check the network cables to
the HP VMA SAN
Gateway. High
interface-up Event Triggered A network interface on an
HP VMA SAN Gateway has
detected link up. Nothing. Low
lid-ajar-time-high 60 Seconds A VMA Array chassis lid is
open Verify VMA Array chassis
lid is closed High
lid-ajar-time-ok 1 Seconds A VMA Array chassis lid
has been closed for at least
this period Nothing. Low
liveness-failure Event Triggered An internal process on an
HP VMA SAN Gateway has
been detected as hung. Please contact HP customer
support High
paging-high 2000 Duration /
sec Memory paging on an HP
VMA SAN Gateway has
exceeded a threshold. Please contact HP customer
support if the system is not
under full data traffic load. Medium
process-crash Event Triggered An internal process on an
HP VMA SAN Gateway has
crashed. A callhome event
is generated with the details
of the event. Please contact HP customer
support. High
process-exit Event Triggered An internal process on an
HP VMA SAN Gateway has
unexpectedly exited. A
callhome event is generated
with the details of the event. Please contact HP customer
support. High
unexpected-shutdown Event Triggered an HP VMA SAN Gateway
has unexpectedly shutdown.
This may happen during a
software upgrade when the
upgrade did not cleanly
apply and the system
reverted back to the
previous version prior to
upgrade. A callhome event
is generated. Please contact HP customer
support. High