HP VMA-series Memory Arrays - Manual (Page 219)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 219
vincident -a
The vincident script collects useful information from the HP VMA SAN
Gateway and HP VMA Array, such as version/timestamp of the current kernel,
CPU information, partition information, HP VMA Array configuration, and HP
VMA Array logs.
Once collected, this information can be sent to Customer Support for analysis to
determine the source of performance issues, such as ECC errors.
The vincident script is installed on the host server as part of the VMA Utilities
package.
Syntax
vincident {-a | | } [--max-timeout
secs]
vincident may be run using the IP address of the HP VMA Array
( ) or using a serial cable connected from the host server to the HP
VMA Array ( ).
The vincident utility creates an incident report in the current directory with a name
similar to vincident.20110624T110149 .
You can either log in as root on the Linux host computer to run the vincident
reporting script, or run it directly from the CLI prompt on the gateway. In the event
that the full path name of the vincident utility is not in the root PATH , the full
path of vincident is /opt/violin/bin/vincident .
Once collected, use the following command to upload the log:
#file debug-dump upload vincident.xxxxx scp://