HP VMA-series Memory Arrays - Manual (Page 121)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 121
An IPv4 network prefix specifying a network. This
is used in conjunction with a netmask to determine
which bits are significant. For example,
"192.168.0.0".
ID of a node (HP VMA SAN Gateway) belonging
to a cluster. This is a numerical value greater than
zero.
A TCP or UDP port number.
expression> An extended regular expression as defined by the
"grep" man page. (The value you provide here is
passed on to "grep -E".)
A TCP port number in the full allowable range
[0..65535].
Either a normal URL, using any protocol that wget
supports, including http, https, ftp, and tftp; or a
pseudo-URL specifying an scp file transfer.
The scp pseudo-URL format is:
scp://username:password@hostname/path/
filename
The path is an absolute path. Paths relative to the
user’s home directory are not currently supported.
Note: If you are using FTP, you will not see a
password prompt when using the URL ftp://
user@hostname/path as you would using SCP. Use
the URL ftp://user:password@hostname/path/ to
transfer log files when authenticating with FTP.