HP VMA-series Memory Arrays User Manual
Page 125
![background image](/manuals/397492/125/background.png)
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
125
Allow this system to receive log messages from another host. This is disabled by
default. If enabled, only log messages matching or exceeding the minimum
severity specified with the
logging local
command are logged,
regardless of what is sent from the remote host.
logging format standard logging format welf
no logging format welf
Sets the format in which log messages should be set. The choices are
standard
and
welf
. The default is
standard
, and the
no
variant resets the format to this.
logging format welf fw-name
no logging format welf fw-name
Specifies the firewall name that should be associated with each message logged in
WELF format. If no firewall name is set, the hostname is used by default. Note that
neither of these commands enables WELF logging if it is not already enabled.
logging level cli commands
Set the severity level at which CLI commands that the user executes are logged.
The default is
info
.
logging files rotation criteria frequency {daily, weekly,
monthly}
logging files rotation criteria size
logging files rotation criteria size-pct
Configure what criteria will be used to decide when log files on local persistent
storage should be automatically rotated. There are two mutually exclusive options:
rotate based on time, or based on when the active log file reaches a certain size
threshold. If the latter is chosen, the size of the file is checked hourly, so if it passes
the threshold in the middle of the hour it will not be rotated until the end of the hour.
logging files rotation max-num
Configure how many old log files will be kept. If the number of log files ever
exceeds this number (either at rotation time, or when this setting is lowered), the
system will delete as many as necessary to bring it down to this number, starting
with the oldest.
logging files rotation force
Force an immediate rotation of the log files. This does not affect the schedule of
auto-rotation if it was done based on time: the next automatic rotation will still