HP VMA-series Memory Arrays - Manual (Page 124)

124 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
mgmt-core (for mgmtd alone), mgmt-back (for other back end components), and
mgmt-front (for front end components, utilities, and tests).
[no] logging local override
Enable or disable all class-specific overrides to the local log level. Overrides are
enabled by default. The no variant which disables them will leave them in
configuration, but disable them such that the logging level for all classes is
determined solely by the global setting.
[no] logging
Send syslog messages to a remote syslog server, or stop sending messages to the
specified server. Note that hostnames are not allowed here.
logging trap
Set the minimum severity of log messages sent to all syslog servers. Note that the
Cisco command set does not provide for setting different severity levels on a per-
server basis.
Set, clear, enable, or disable class-specific log level overrides for all syslog servers.
Semantics are the same as for the logging local ... variants above.
logging trap
Set the minimum severity of log messages sent to the indicated syslog server. This
is not Cisco compatible (as noted above) but does match functionality provided in
the reference UI.
logging trap override class priority level>
no logging trap override class
[no] logging trap override
Set, clear, enable, or disable class-specific log level overrides for the specified
syslog server. Semantics are the same as for the logging local ... variants
above.
no logging trap
Disable logging to syslog servers altogether. This simply sets the severity level to
none ; the list of servers is not erased. Does not affect console or local logging,
despite the generic sound of the term trap .
[no] logging receive