HP VMA-series Memory Arrays - Manual (Page 34)

34 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
The settings for the modem are as follows:
KVM Connection
If a null modem cable is not available, a KVM (USB keyboard, VGA video
monitor, and USB mouse) may be used to directly plug into the public interface for
configuration.
Connecting Data Ports to Network Switches
In a typical configuration, two HP VMA SAN Gateways are connected to two
switches. Each HP VMA SAN Gateway has dual HBAs and connects to two
switches.
Each HP VMA SAN Gateway connects to the network via four 8Gb Fibre Channel
connectors. Each port is functionally identical and is provided for improved
Port Setting Name Value
Bits per second 9600
Data bits 8
Parity None
Stopbits 1
Flowcontrol None
Table 2.2 Modem Settings
Figure 2.6 HP VMA SAN Gateway Network Connectivity