HP VMA-series Memory Arrays - Manual (Page 46)

46 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
When you complete the list of questions, the configuration wizard displays
your responses and prompts you to accept or reject the settings:
5. To save your responses, and exit the configuration wizard press the Enter key.
The configuration wizard displays the HP VMA SAN Gateway cluster settings
and exits to the CLI.
To change an answer, enter the step number to return to.
Otherwise hit to save changes and exit.
Choice: █
You have entered the following information:
1. Configure as master/stand-alone: yes
2. Public interface name: eth0
3. Public interface IP address: 10.3.7.84
4. Public interface netmask: 255.255.252.0
5. Global default gateway: 10.3.4.1
6. DNS server name(s): 10.3.4.2
7. Domain name: mv.vmem.com
8. Hostname: gateway01
9. Admin password (Enter to leave unchanged): (CHANGED)
10. Set clock timezone: yes
11. Zone to use: America
12. Sub-zone 1 to use: North
13. Sub-zone 2 to use: United_States
14. Sub-zone 3 to use: Pacific
15. NTP server name(s): 10.1.1.2
16. Email Notification recipient(s): [email protected],[email protected]
17. Email mailhub: smtp.company.com
18. Email mailhub port: 25
19. Enable HP support: yes
20. Cluster interface name: vlan14
21. Cluster expected nodes: 2
22. Cluster id: 00500-0008-0105
23. Cluster name: cluster1