HP VMA-series Memory Arrays - Manual (Page 159)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 159
Remove a public key from the specified user’s authorized key list. The key
identifier can be found by using 'show ssh client'.
show ssh client
Display information about SSH client identities (public/private keys) and the per
user list of authorized keys for the users.
Banner
At various login points, some legal and welcome text can be displayed. This text is
controlled by bindings and can be set by the user from the CLI as follows:
banner login
no banner login
Set the contents of the /etc/issue and /etc/issue.net files.
banner motd
no banner motd
Set the contents of the /etc/motd file.
show banner
Display the contents of the currently configured banners.
CLI Options
There are four groups of commands relating to the CLI itself:
• cli session .. . commands change a setting only for the current CLI
session. They do not affect any other sessions, and can be performed by any
user at any time. All of these commands are INTERACTIVE (not available
from the Scheduler).
• cli default ... commands change the defaults for the specified setting
for all future CLI sessions of all users. They also change the setting for the
current session from which they were executed, but not for any other currently
active sessions. Since they change configuration, the user must be in Config
mode to run them, and hence they can only be run by admin.
• Other cli ... commands which take one-time actions, rather than change a
setting, and thus do not fall under the session or default umbrellas. For
example,
cli clear-history .