HP VMA-series Memory Arrays - Manual (Page 52)

52 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
A typical configuration of a normal node HP VMA SAN Gateway using the
configuration wizard might look like the following example:
Cluster ID: 00500-0008-0105
Cluster name: cluster1
Management IP: 10.1.9.100/22
Cluster master IF: eth0
Cluster node count: 2
Local name: gateway02
Local role: standby
Local state: online
Master address: 10.1.9.102 (ext) 169.254.9.21 (int)
Master state: online
*gateway02 [cluster1: standby] (config) # █
HP VMA SAN Gateway configuration wizard
Press '?' for help, Ctrl+B to go back to the previous step.
Default value is in square brackets: press Enter to accept
it.
Press Ctrl+R to clear default to enter empty string.
Press Ctrl+C to jump to the end of the wizard at any time.
You have entered the following information:
1. Configure as master/stand-alone: no
2. Public interface name: eth0
3. Public interface IP address: 10.1.9.101
4. Public interface netmask: 255.255.252.0
5. Hostname: gateway02
6. Cluster interface name: vlan14
7. Cluster id: 00500-0008-0105
To change an answer, enter the step number to return to.
Otherwise hit to save changes and exit.
Choice: █