Appendix d: standard system configurations, Appendix d:. standard system configurations, Also see – HP VMA-series Memory Arrays User Manual
Page 233: Standard system configurations, Appendix d
AM456-9007B Rev 02
HP VMA SAN Gateway Installation and User Guide
233
APPENDIX D:
Standard System Configurations
Single Gateway with 1–2 3000-Series Arrays, Non-Redundant
shows a configuration where a single HP VMA SAN Gateway is
connected to a group of up to two VMA Arrays using PCIe cables. In the example,
the HP VMA SAN Gateway is connected to Port 1 on each VMA Array in x8 mode.
Note:
In the vSHARE software,
Port A
refers to the port that is labeled
Port 1
on
some VMA Arrays and
Port A
on others;
Port B
refers to the port that is labeled
Port
2
or
Port B
.
Dual Gateways with 1–2 3000-Series Arrays, Highly Available
shows a High Availability (HA) configuration, where two HP VMA
SAN Gateways provide redundant access to a group of up to two VMA Arrays.
Figure D.1 Single Gateway with 1–2 3000-Series Arrays, Non-Redundant