HP VMA-series Memory Arrays - Manual (Page 115)

AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide 115
provides a list of available commands corresponding to the current mode. (Modes
are described in Command Modes on page 117.)
You can also query for options of a specific command by typing in the command,
following it with a space, and adding a question mark. After displaying a list of
options, the command line echoes the string and puts the cursor after it, ready for
more input.
For example, in Standard mode you can enter cli ? at the command line and see
the following output.
If the command is complete without further options or values, is displayed
on a separate line and the command is echoed at the prompt. Pressing the Enter key
(also known as carriage return, will then issue the command if no values are
required, or will be displayed.
> cli ?
clear-history Clear the command history for the current user
session Configure CLI options for this session only
> cli █