HP VMA-series Memory Arrays - Manual (Page 130)

130 AM456-9007B Rev 02 HP VMA SAN Gateway Installation and User Guide
may be required to be specified in two, three, or four words, depending on the
city. The possible forms this could take include:
• An offset from GMT.
This will be in the form GMT-offset GMT , GMT-offset GMT+<1-12> , or
GMT-offset GMT-<1-14> .
• UTC. This is almost identical to GMT.
The default is GMT-offset GMT .
show clock
Display the current system time, date, and timezone.
ntpdate
Set the system clock using the specified NTP server. This is a one-time operation
and does not cause the clock to be kept in sync on an ongoing basis. It will generate
an error if NTP is enabled, as the socket it requires will already be in use.
ntp peer [version ]
no ntp peer
Add or remove an NTP peer. Allowable version numbers are 3 and 4. If no version
number is specified when adding a peer, the default is 4.
ntp server [version ]
no ntp server
Add or remove an NTP server. Allowable version numbers are 3 and 4. If no
version number is specified when adding a server, the default is 4.
[no] ntp peer disable
[no] ntp server disable