GW Instek GDS-2000A series User Manual - Manual (Page 95)

MEASUREMENT
95
3. Select Source 1 from the side menu
Range CH1~4, Ref~4
4. Press Operator to choose the math
operation.
Range +, -, Ч, ч
5. Select Source 2 from the side menu.
Range CH1~4, Ref~4
6. The math measurement result appears on the
display. The vertical scale of the math
waveform appears at the bottom of the screen.
From left: Math function, source1, operator,
source2, Unit/div
Example
Math
Source 2
Source 1
Position and Unit To move the math waveform
vertically, press the Position key from
the side menu and use the Variable
knob to set the position.