GW Instek GDS-2000A series User Manual - Manual (Page 165)

CONFIGURATION
165
Copying Search Event To/From Trigger Events
Background As the trigger system and search feature have
similar settings, their settings can be used
interchangeably by using the Copy functions.
Interchangeable
Settings Edge, Pulse Width, Pulse Runt, Rise and Fall Times,
Logic, Bus
Panel Operation 1. Press Search from the lower bezel
menu.
2. To copy settings of the selected
search type to the trigger settings,
select Copy Search Settings to
Trigger.
3. To copy over the current trigger
settings to the search settings,
press Copy Trigger Settings to
Search.
Note
If the settings cannot be copied or if the there are no
trigger settings configured (so that you cannot copy
from the trigger settings), then those particular
options will not be available.
Search Event Navigation
Background When using the search feature, each event can be
searched for according to the event settings.
Operation 1. Turn Search on and set the
appropriate search type.
163