GW Instek GDS-2000A series User Manual - Manual (Page 205)

SAVE/RECALL
205
Recall Waveform
Panel Operation 1. For recalling from an
external USB flash drive,
connect the drive to the
front or rear panel USB port.
Front Rear
Host
Note
Only one host connection, front or rear, is allowed at a
time.
The USB Device port on the rear panel cannot be used
concurrently with the USB Host port on the rear panel.
2. The waveform must be stored in advance. See
page 198 for waveform store details.
3. Press the Save/Recall key.
Save/Recall
4. Press Recall Waveform from the
bottom menu. The Recall menu
appears.
5. Press From (internal memory) or
From File and choose a source to
recall from.
From Wave1~20
From File* File format: Lsf, Fast Csv