Socket server functionality check – GW Instek GDS-2000A series User Manual User Manual

Page 231

Text mode
Original mode

REMOTE CONTROL CONFIG

231

Socket Server Functionality Check

NI Measurement
and Automation
Explorer

To test the socket server functionality, National
Instruments Measurement and Automation
Explorer can be used. This program is available on
the NI website, www.ni.com.

Operation

1. Start the NI Measurement and

Automation Explorer (MAX)
program. Using Windows, press:

Start>All Programs>National
Instruments>Measurement & Automation

2. From the Configuration panel access;

My System>Devices and Interfaces>Network
Devices

3. Press Add New Network Device>Visa TCP/IP

Resource…