GW Instek GDS-2000A series User Manual - Manual (Page 203)

SAVE/RECALL
203
Setting Contents The following is the default (factory) setting
contents.
Acquire Mode: Sample XY: OFF
Sample mode: Sinc Sample rate: 2GSPS
Digital filter: Off Record Length: Auto
Display Mode: Vector Persistence: 16ms
Waveform intensity: 50% Graticule intensity: 50%
Waveform visuals: Gray Graticule: full
Channel Scale: 100mV/Div CH1: On
Coupling: DC Impedance: 1MΩ
Invert: Off Bandwidth: full
Expand: By ground Position: 0.00V
Probe: voltage Probe attenuation: 1x
Deskew: 0s
Cursor Horizontal cursor: Off Vertical Cursor: Off
H Unit: S V Unit: Base
Measure Source 1: CH1 Source 2: CH2
Gating: Off Display: Off
High-Low: Auto Statistics: Off
Mean & Std: 2
Horizontal Scale: 10us/Div
Math Source1: CH1 Operator: +
Source2: CH2 Position: 0.00 Div
Unit/Div: 200mV Math Off
Test App: Go-NoGo
Trigger Type: Edge Source: CH1
Coupling: DC Alternate: Off